MC74HC74ANG
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Supplier Device Package | 14-PDIP |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | D-Type |
| Voltage - Supply | 2V~6V |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Clock Frequency | 35MHz |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 17ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| RoHS Status | ROHS3 Compliant |
MC74HC74ANG Overview
14-DIP (0.300, 7.62mm)is the way it is packaged. There is an embedded version in the package Tube. As configured, the output uses Differential. It is configured with a trigger that uses a value of Positive Edge. Through Holeis occupied by this electronic component. A 2V~6Vsupply voltage is required for it to operate. In the operating environment, the temperature is -55°C~125°C TA. Logic flip flops of this type are classified as D-Type. This type of FPGA is a part of the 74HC series. In order for it to function properly, its output frequency should not exceed 35MHz. There are 2 elements in it. This process consumes 2μA quiescents. Its input capacitance is 10pFfarads.
MC74HC74ANG Features
Tube package
74HC series
MC74HC74ANG Applications
There are a lot of Rochester Electronics, LLC MC74HC74ANG Flip Flops applications.
- Supports Live Insertion
- Memory
- Count Modes
- Event Detectors
- CMOS Process
- Data storage
- Synchronous counter
- 2 – Bit synchronous counter
- Communications
- Storage registers
