MC74HCT125ADTG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 19 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HCT125 |
| Pin Count | 14 |
| Output Type | 3-State |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 18 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 36 ns |
| Family | HCT |
| Logic Function | Buffer, Inverting |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | Buffer, Non-Inverting |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 1 |
| Prop. Delay@Nom-Sup | 27 ns |
| Control Type | ENABLE LOW |
| Number of Input Lines | 4 |
| Schmitt Trigger Input | No |
| Input Conditioning | STANDARD |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HCT125ADTG Overview
Logical driver uses a neat 14-TSSOP (0.173, 4.40mm Width) package. Tube external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 2V~6V. Qualified to operate within -55°C~125°C TA. The high and low logic state output current of logical driver is 6mA 6mA. Logical driver can deal with 3-State output (s). Digital buffer is one of the 74HCT series devices. 14 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. Electronic parts from the HCT family are used in this part. 14 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 14 pins. The bus transceiver employs 1 bits for each element. You can search "74HCT125" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 4μA. It is recommended to use a 5V power supply. It is generally sold in RAIL package. To supply the device, a minimum voltage of 2V is a must. Because of its 4 lines level input capability, buffer IC is more cost-effective on transimitting signals. Does the electronic component support schmitt trigger input? No.
MC74HCT125ADTG Features
Bus Driver/Transceivers
MC74HCT125ADTG Applications
There are a lot of ON Semiconductor MC74HCT125ADTG Buffers & Transceivers applications.
- Changeing the frequency from IF to RF
- Point-to-point networking
- Portable radio
- Low power, low voltage systems
- Broadcast application
- Satellite ground stations
- High-speed computer links
- IP cameras
- Data center
- AV receiver
