MC74HCT273ADTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HCT273 |
| Function | Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 30MHz |
| Propagation Delay | 25 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 25 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 25ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HCT273ADTR2G Overview
In the form of 20-TSSOP (0.173, 4.40mm Width), it has been packaged. It is included in the package Tape & Reel (TR). The output it is configured with uses Non-Inverted. The trigger configured with it uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. It is operating at a temperature of -55°C~125°C TA. D-Typedescribes this flip flop. In this case, it is a type of FPGA belonging to the 74HCT series. A frequency of 30MHzshould not be exceeded by its output. The element count is 1 . It has been determined that there have been 20 terminations. The object belongs to the 74HCT273 family. The D flip flop is powered by a voltage of 5V . In terms of electronic devices, this device belongs to the HCTfamily of devices. In this case, the electronic component is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. This device has Positive Edgeas its clock edge trigger type. This device is part of the FF/Latchesbase part number family. There are 8bits in its design. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. There are 5V power supplies attached to it. The supply voltage should be maintained at 5V for high efficiency. Currently, there are 8 lines of input. As a result, it consumes 4μA of quiescent current without being affected by external factors. Currently, there are 2 channels available.
MC74HCT273ADTR2G Features
Tape & Reel (TR) package
74HCT series
20 pins
8 Bits
5V power supplies
MC74HCT273ADTR2G Applications
There are a lot of ON Semiconductor MC74HCT273ADTR2G Flip Flops applications.
- Differential Individual
- Control circuits
- Power down protection
- Frequency division
- Communications
- Frequency Divider circuits
- Digital electronics systems
- Test & Measurement
- EMI reduction circuitry
- Bus hold
