MC74HCT273ADW
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT273 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 30MHz |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 25 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 25ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | 74HCT |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
MC74HCT273ADW Overview
20-SOIC (0.295, 7.50mm Width)is the way it is packaged. You can find it in the Tubepackage. This output is configured with Non-Inverted. Positive Edgeis the trigger it is configured with. Surface Mountis occupied by this electronic component. With a supply voltage of 4.5V~5.5V volts, it operates. -55°C~125°C TAis the operating temperature. This logic flip flop is classified as type D-Type. In terms of FPGAs, it belongs to the 74HCT series. Its output frequency should not exceed 30MHz. D latch consists of 1 elements. There is 4μA quiescent consumption. A total of 20 terminations have been made. If you search by 74HCT273, you will find similar parts. A voltage of 5V is used as the power supply for this D latch. In terms of electronic devices, this device belongs to the HCTfamily of devices. The electronic part is mounted in the way of Surface Mount. It is designed with 20 pins. There is a clock edge trigger type of Positive Edgeon this device. This device is part of the FF/Latchesbase part number family. It is designed with 8bits. To achieve this superior flexibility, 8 circuits are used. A reliable performance of this D flip flop makes it well suited for use in RAIL. The D latch runs on a voltage of 5V volts. In order to achieve high efficiency, the supply voltage should be maintained at 5V.
MC74HCT273ADW Features
Tube package
74HCT series
20 pins
8 Bits
5V power supplies
MC74HCT273ADW Applications
There are a lot of ON Semiconductor MC74HCT273ADW Flip Flops applications.
- Asynchronous counter
- Dynamic threshold performance
- Latch-up performance
- Storage Registers
- QML qualified product
- Latch
- Computing
- Bus hold
- Data storage
- ATE
