MC74HCT366ADR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | 74HCT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 6 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HCT366 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | 3-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 6 |
| Load Capacitance | 50pF |
| Number of Bits | 6 |
| Propagation Delay | 20 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 330 ns |
| Family | HCT |
| Logic Function | Buffer, Inverter |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | Buffer, Inverting |
| Control Type | ENABLE LOW |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HCT366ADR2G Overview
Logical driver uses a neat 16-SOIC (0.154, 3.90mm Width) package. Tape & Reel (TR) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Inverting logic prototype. Buffer IC is fed with a voltage of 2V~6V. Qualified to operate within -55°C~125°C TA. The high and low logic state output current of logical driver is 7.8mA 7.8mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 74HCT series devices. 16 terminations with different functions. Buffer IC reuqires a supply voltage of 3V. Electronic parts from the HCT family are used in this part. 16 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 16 pins. You can search "74HCT366" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 4μA. It is recommended to use a 5V power supply. It is generally sold in TAPE AND REEL package. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. To supply the device, a minimum voltage of 2V is a must. 6 bits are included within the electrical component. The fundamental operation of logical driver is based on 6 circuits.
MC74HCT366ADR2G Features
Bus Driver/Transceivers
MC74HCT366ADR2G Applications
There are a lot of ON Semiconductor MC74HCT366ADR2G Buffers & Transceivers applications.
- Ethernet circuitry
- Radio transmission
- Thermal management
- 1x/2x Fiber Channel
- Wireless access points
- Satellite communication
- Fiber distributed data interface (FDDI)
- Fast Ethernet
- transmission relay
- Single to Multimode Fiber Conversion
