MC74HCT373ADTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 190.990737mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HCT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Max Supply Current | 4μA |
| Number of Bits | 8 |
| Propagation Delay | 28 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 28 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type Transparent Latch |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HCT373ADTR2G Overview
Package 20-TSSOP (0.173, 4.40mm Width) includes it. As a result, it has a packaging of Tape & Reel (TR). There is a Tri-State output configured. There is D-Type Transparent Latch logic type for this electrical device. The electronic component is mounted according to the Surface Mount method. It operates with a supply voltage of 4.5V~5.5V. It is -55°C~125°C at the operating temperature. It is a type of FPGA belonging to the 74HCT series. The design of this electronic part is based on 8 bits. This device has been designed with 20 terminations available. It belongs to 74HCT373 family. A 5V voltage supply is required for operation. There are 20 pins on it. It is a member of the HCT family of electronic devices. There are 20 pins on it. Electronic parts are mounted using the Surface Mount method. In this device, there is a total of 2 ports available for use. Subcategory FF/Latches contains this part. A total of 5V power supplies are needed to run it. The device's reliable performance makes it a good choice for TAPE AND REEL. A high efficiency supply voltage should be maintained at 5V. The binary equivalent of the input line is generated by 3 output lines. Without external influences, it consumes 4μA of quiescent current. 8 circuits enable it to achieve high performance.
MC74HCT373ADTR2G Features
20-TSSOP (0.173, 4.40mm Width) package
74HCT series
8 Bits
74HCT373 family
20 pin count
20 pins
5V power supplies
MC74HCT373ADTR2G Applications
There are a lot of ON Semiconductor MC74HCT373ADTR2G Latches applications.
- Buffer Storage
- Up/down difference counting
- General-Purpose Register
- Decade counting 7-segment decimal display
- Stacked or Push-Down Registers
- Serial Output Register
- Decade counting
- Counting
- Shift left register
- Up-Down Johnson
