Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Weight |
800.987426mg |
Operating Temperature |
-55°C~125°C |
Packaging |
Tube |
Published |
2006 |
Series |
74HCT |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin (Sn) |
Subcategory |
FF/Latches |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
250 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
74HCT373 |
Pin Count |
20 |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Number of Circuits |
8 |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
6mA |
Max Supply Current |
4μA |
Number of Bits |
8 |
Propagation Delay |
28 ns |
Quiescent Current |
4μA |
Turn On Delay Time |
28 ns |
Family |
HCT |
Logic Function |
D-Type, Latch |
Halogen Free |
Halogen Free |
Current - Output High, Low |
6mA 6mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.006 A |
Prop. Delay@Nom-Sup |
42 ns |
Independent Circuits |
1 |
Number of Output Lines |
3 |
Height |
2.4mm |
Length |
12.95mm |
Width |
7.6mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MC74HCT373ADWG Overview
It is embedded in the 20-SOIC (0.295, 7.50mm Width) package. It is packaged in the way of Tube. It uses the output configuration Tri-State. There is D-Type Transparent Latch logic type for this electrical device. Based on the way of Surface Mount, this electronic part is mounted. It operates with a supply voltage of 4.5V~5.5V. It operates at -55°C~125°C degrees Celsius. In the 74HCT series, this FPGA is located. There are 8 bits in this electronic part. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The family it belongs to is 74HCT373. In order to operate it, the supply voltage must be 5V. 20 pins are included. This electronic device belongs to the family of HCT. The 20 pins are designed into it. Surface Mount is the method used for mounting this electronic part. In this device, there are 2 ports. The part is in the FF/Latches subcategory. It operates from 5V power supplies. The 6mA output current gives it maximum design flexibility. High efficiency requires maintaining the supply voltage at 5V. Input lines are generated as binary equivalents by 3 output lines. Aquiescent current is consumed by 4μA without being affected by external forces. The superior flexibility of this circuit can be attributed to the use of 8 circuits.
MC74HCT373ADWG Features
20-SOIC (0.295, 7.50mm Width) package
74HCT series
8 Bits
74HCT373 family
20 pin count
20 pins
5V power supplies
MC74HCT373ADWG Applications
There are a lot of ON Semiconductor MC74HCT373ADWG Latches applications.
- Digital bus buffer
- Bus system register with enable parallel lines at bus side
- Meter applications
- A/D and D/A conversion
- Shift register
- Automotive Infotainment
- Synchronous frequency dividers
- Instrumentation
- Buffer Storage
- Up-Down Johnson