MC74HCT373ADWR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74HCT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HCT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 53 ns |
| Turn On Delay Time | 28 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HCT373ADWR2G Overview
It is embedded in the 20-SOIC (0.295, 7.50mm Width) package. Tape & Reel (TR) is the packaging method. There is a Tri-State output configured. D-Type Transparent Latch is the logic type of this electrical device. Electronic parts are mounted in accordance with Surface Mount. The voltage supply is 4.5V~5.5V. It is -55°C~125°C at the operating temperature. This FPGA is part of the 74HCT series. The design of this electronic part contains 8 bits. This device has been designed with 20 terminations available. 74HCT373 is the family name of it. A 5V voltage supply is required for operation. The 20 pind are equipped with it. HCT is the family name of this electronic device. The 20 pins are designed into it. Electronic parts are mounted using the Surface Mount method. This device has a total of 2 ports. The part is in the FF/Latches subcategory. It operates from 5V power supplies. Electronic circuits comprise 8 input lines. The reliability of this device makes it well suited to TAPE AND REEL. If you want to achieve high efficiency, make sure the supply voltage is at 5V. Input lines are generated as binary equivalents by 3 output lines.
MC74HCT373ADWR2G Features
20-SOIC (0.295, 7.50mm Width) package
74HCT series
8 Bits
74HCT373 family
20 pin count
20 pins
5V power supplies
MC74HCT373ADWR2G Applications
There are a lot of ON Semiconductor MC74HCT373ADWR2G Latches applications.
- Hammer
- Serial Output Data Queuing
- General-Purpose Register
- Up-Down Johnson
- Double bus register system
- Counters
- Parallel-to-Serial Data Conversion
- Automotive ADAS
- Parallel data synchronization
- Address register
