MC74HCT373AN
| Parameters | |
|---|---|
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Number of Gates | 8 |
| Prop. Delay@Nom-Sup | 42 ns |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height Seated (Max) | 4.57mm |
| Width | 7.62mm |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Published | 2000 |
| Series | 74HCT |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | Through Hole |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HCT373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 6mA |
| Number of Bits | 8 |
| Propagation Delay | 28 ns |
| Turn On Delay Time | 28 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 6mA 6mA |
MC74HCT373AN Overview
There is an embedded version of it in package 20-DIP (0.300, 7.62mm). This package has the format of Tube. It uses the output configuration Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. A Through Hole mount is used for mounting this electronic part. With a supply voltage of 4.5V~5.5V, it operates. A temperature of -55°C~125°C is used for operation. 74HCT is the series number of this FPGA. 8 Bits are used in the design of this electronic part. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The family in which it belongs to is 74HCT373. The device works with a voltage of 5V for its supply voltage. There are 20 pins on it. This electronic device is categorized as a HCT electronic device. Designed with 20 pins, it is compatible with a wide range of devices. This electronic part is mounted in the way of Through Hole. This device has 2 ports that can be connected to it. There is a subcategory of FF/Latches for this part. During this period, the maximum supply voltage (Vsup) reaches 5.5V. A total of 5V power supplies are required for it to operate. Ensure that the supply voltage (Vsup) is greater than 4.5V. Due to its 6mA output current, it offers maximum design flexibility. There are 3 output lines that correspond to the binary equivalents of the input line.
MC74HCT373AN Features
20-DIP (0.300, 7.62mm) package
74HCT series
8 Bits
74HCT373 family
20 pin count
20 pins
5V power supplies
MC74HCT373AN Applications
There are a lot of ON Semiconductor MC74HCT373AN Latches applications.
- Automotive Cluster
- Shift Registers
- Counting
- Double bus register system
- Counter timers
- Parallel Output
- Four-bit storage with output enable
- Buffer/Storage Registers
- Buffer register
- Parallel-to-Serial Data Conversion
