banner_page

MC74HCT373ANG

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74HCT Series 74HCT373 20 Pins DUAL CMOS 20-DIP (0.300, 7.62mm)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-MC74HCT373ANG
  • Package: 20-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 571
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74HCT Series 74HCT373 20 Pins DUAL CMOS 20-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case 20-DIP (0.300, 7.62mm)
Number of Pins 20
Weight 2.259996g
Operating Temperature -55°C~125°C
Packaging Tube
Published 2006
Series 74HCT
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Terminal Finish Tin (Sn)
Subcategory FF/Latches
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number 74HCT373
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Power Supplies 5V
Number of Circuits 8
Load Capacitance 50pF
Number of Ports 2
Output Current 6mA
Max Supply Current 4μA
Number of Bits 8
Propagation Delay 28 ns
Quiescent Current 4μA
Turn On Delay Time 28 ns
Family HCT
Logic Function D-Type, Latch
Current - Output High, Low 6mA 6mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.006 A
Prop. Delay@Nom-Sup 42 ns
Independent Circuits 1
Number of Output Lines 3
Height Seated (Max) 4.57mm
Width 7.62mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Lead Free Lead Free

MC74HCT373ANG Overview


The package in which it is embedded is named 20-DIP (0.300, 7.62mm). Tube is the packaging method. It uses the output configuration Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. The way in which this electronic part is mounted is Through Hole. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. A temperature of -55°C~125°C is set as the operating temperature. This FPGA is part of the 74HCT series. 8 Bits are used in the design of this electronic part. In this device, there are 20 terminations. The family it belongs to is 74HCT373. With a supply voltage of 5V, it operates. It is equipped with 20 pin count. It is a member of the HCT family of electronic devices. With the design of the board, there are only 20 pins. Through Hole is the way in which this electronic part is mounted. This device is equipped with 2 ports. FF/Latches is the subcategory of this part. A total of 5V power supplies are needed to run it. Due to its 6mA output current, it offers maximum design flexibility. A high efficiency supply voltage should be maintained at 5V. It follows that 3 output lines are generated from the binary equivalent of the input line. It consumes 4μA of quiescent current without being affected by outside factors. Its superior flexibility is achieved by using 8 circuits.

MC74HCT373ANG Features


20-DIP (0.300, 7.62mm) package
74HCT series
8 Bits
74HCT373 family
20 pin count
20 pins
5V power supplies

MC74HCT373ANG Applications


There are a lot of ON Semiconductor MC74HCT373ANG Latches applications.

  • Hammer Device Information
  • Registers
  • BCD counting
  • Automotive Infotainment
  • Serial Input
  • Counters
  • Lamp and Display (LED)
  • Synchronous frequency dividers
  • Network Switches
  • Frequency

Write a review

Note: HTML is not translated!
    Bad           Good