MC74HCT374ADW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | 74HCT |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HCT374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 30MHz |
| Propagation Delay | 31 ns |
| Turn On Delay Time | 31 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 6mA 6mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 31ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HCT374ADW Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). There is an embedded version in the package Tube. In the configuration, Tri-State, Non-Invertedis used as the output. Positive Edgeis the trigger it is configured with. Surface Mountis in the way of this electric part. The JK flip flop operates at 4.5V~5.5Vvolts. -55°C~125°C TAis the operating temperature. There is D-Type type of electronic flip flop associated with this device. It belongs to the 74HCTseries of FPGAs. Its output frequency should not exceed 30MHz Hz. In total, it contains 1 elements. T flip flop consumes 4μA quiescent energy. There have been 20 terminations. You can search similar parts based on 74HCT374. Power is supplied from a voltage of 5V volts. A 10pFfarad input capacitance is provided by this T flip flop. In terms of electronic devices, this device belongs to the HCTfamily of devices. There is an electronic component mounted in the way of Surface Mount. It is designed with 20 pins. It has a clock edge trigger type of Positive Edge. This part is included in FF/Latches. An electronic part designed with 8bits is used in this application. It reaches the maximum supply voltage (Vsup) at 5.5V. For normal operation, the supply voltage (Vsup) should be kept above 4.5V. 8 circuits are used to achieve its superior flexibility. Considering its reliability, this T flip flop is well suited for RAIL. The power supply is 5V. This flip flop has a total of 2ports. There are 3 output lines in this JK flip flop.
MC74HCT374ADW Features
Tube package
74HCT series
20 pins
8 Bits
5V power supplies
MC74HCT374ADW Applications
There are a lot of ON Semiconductor MC74HCT374ADW Flip Flops applications.
- Matched Rise and Fall
- Latch-up performance
- Automotive
- Buffered Clock
- Convert a momentary switch to a toggle switch
- Synchronous counter
- Storage registers
- Bus hold
- Clock pulse
- Individual Asynchronous Resets
