MC74HCT374AN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HCT |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HCT374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 30MHz |
| Propagation Delay | 31 ns |
| Turn On Delay Time | 31 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 6mA 6mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 31ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 4.57mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HCT374AN Overview
In the form of 20-DIP (0.300, 7.62mm), it has been packaged. D flip flop is embedded in the Tube package. In the configuration, Tri-State, Non-Invertedis used as the output. The trigger it is configured with uses Positive Edge. It is mounted in the way of Through Hole. A supply voltage of 4.5V~5.5V is required for operation. Currently, the operating temperature is -55°C~125°C TA. This electronic flip flop is of type D-Type. JK flip flop belongs to the 74HCTseries of FPGAs. This D flip flop should not have a frequency greater than 30MHz. A total of 1 elements are present. As a result, it consumes 4μA quiescent current and is not affected by external forces. There are 20 terminations,The 74HCT374family includes it. An input voltage of 5Vpowers the D latch. The input capacitance of this T flip flop is 10pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. An electronic device belonging to the family HCTcan be found here. This electronic part is mounted in the way of Through Hole. The 20pins are designed into the board. The clock edge trigger type for this device is Positive Edge. This device has the base part number FF/Latches. This flip flop is designed with 8 Bits. Its superior flexibility is attributed to its use of 8 circuits. There are 5V power supplies attached to it. The flip flop has 2ports embedded within it. If high efficiency is desired, the supply voltage should be kept at 5V. It is designed with 3 output lines.
MC74HCT374AN Features
Tube package
74HCT series
20 pins
8 Bits
5V power supplies
MC74HCT374AN Applications
There are a lot of ON Semiconductor MC74HCT374AN Flip Flops applications.
- CMOS Process
- Latch-up performance
- Power down protection
- Clock pulse
- Frequency Dividers
- Storage registers
- Supports Live Insertion
- Memory
- Single Down Count-Control Line
- Counters
