MC74HCT4051ADG
| Parameters | |
|---|---|
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Power Dissipation | 500mW |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±2V~6V |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Max Dual Supply Voltage | 6V |
| -3db Bandwidth | 80MHz |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 1V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Number of Input Lines | 11 |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 130pF |
| On-state Resistance Match-Nom | 30Ohm |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 345ns |
| Switch-off Time-Max | 220ns |
| Length | 9.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 100Ohm |
| Terminal Finish | Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MC74HCT4051A |
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
MC74HCT4051ADG Overview
The electrical component comes in 16-SOIC (0.295, 7.50mm Width) packaging, which makes it convenient to ship overseas. Advanced packaging method Tube is used to provide high reliability. It is mounted in the position Surface Mount. 8:1 is the ratio of multiplexer to demultiplexer circuits. Temperatures around -55°C~125°C TA are extended for operation. In total, 16 terminations have occurred. The electronic part delivers high-quality output through its 8 channels. If the voltage supply is 4.5V volts, the electrical component should be turned on and run. It is part of the design of the 16 series that this electronic component is included. There are 1 circuits in this multiplexer. If you are looking for variants of the digital switch, trying search with MC74HCT4051A. This digital multiplexer has 100Ohm internal resistance. Datasheets for functions of 16 pins are available. Multiplexers should not be powered above 6V in normal situations. Single supply type digital switch with a low cost. A low voltage of 2V should be applied to the electronic component. An operating current of 1μA would be sufficient for this switch device. For this switch, a dual supply voltage is feasible, but it must not exceed 6VIf you are using dual power supplies, you should attach at least 1V. There are 8 inputs to be operated.
MC74HCT4051ADG Features
8 Channels
1μA Supply Current
-3db Bandwidth: 80MHz
MC74HCT4051ADG Applications
There are a lot of ON Semiconductor MC74HCT4051ADG Analog Switches & Multiplexers ICs applications.
- CSU
- Multi-Line E1 Interface Cards
- Communication systems
- Medical
- Ultrasound
- Cross Connects
- High speed data transmission line cards
- Audio/video switches
- Cable PC
- Digital cross connects (DSX-1)
