MC74HCT4051ADR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 100Ohm |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MC74HCT4051A |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Power Dissipation | 500mW |
| Propagation Delay | 45 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±2V~6V |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Bandwidth | 80MHz |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 1V |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Number of Input Lines | 11 |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 130pF |
| On-state Resistance Match-Nom | 30Ohm |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-off Time-Max | 220ns |
| Length | 9.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HCT4051ADR2G Overview
Presented in 16-SOIC (0.295, 7.50mm Width), this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexer and demultiplexer circuits have a number 8:1. Operating temperature around -55°C~125°C TA extended. A total of 16 terminations have been recorded. The electronic part delivers high-quality output through its 4 channels. With a 4.5V voltage supply, the electrical component should be turned on and run. It is injected into the electrical part body with 16 pins. The circuits in this analogue multiplexer number 1. Try searching with MC74HCT4051A to find analog multiplexer variants. Analog switches have 100Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. normally, users should not supply switches with voltages higher than 6V. Analogue multiplexers of the Single supply type that are cost-effective. 2V should be the lowest voltage fed to the electronic component. An operating current of 1μA would be sufficient for this switch device. For this switch, a dual supply voltage is feasible, but it must not exceed 6VIf you are using dual power supplies, you should attach at least 1V. A 8 input needs to be operated. There are various bandwidths available for data transfer.
MC74HCT4051ADR2G Features
4 Channels
1μA Supply Current
Bandwidth: 80MHz
MC74HCT4051ADR2G Applications
There are a lot of ON Semiconductor MC74HCT4051ADR2G Analog Switches & Multiplexers ICs applications.
- Automotive applications
- Communications systems
- Communication systems
- E1 Network Equipment
- Channel Banks
- High reliability control systems
- Cable PC
- Central office
- Battery Powered Instruments
- Multi-Line E1 Interface Cards
