MC74HCT4051ADTG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 100Ohm |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MC74HCT4051A |
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Power Dissipation | 450mW |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±2V~6V |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Max Dual Supply Voltage | 6V |
| -3db Bandwidth | 80MHz |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 1V |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Number of Input Lines | 11 |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 130pF |
| On-state Resistance Match-Nom | 30Ohm |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 345ns |
| Switch-off Time-Max | 220ns |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HCT4051ADTG Overview
The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tube is used. Mounted in Surface Mount is this multiplexer. There is 8:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around -55°C~125°C TA. A total of 16 terminations have been recorded. Due to its 8 channels, the electrical component produces high-quality output. Powered by a 4.5V voltage supply, the electrical part should be switched on and run. Electronic part bodies are injected with 16 pins. The multiplexer consists of 1 circuits. If you are looking for variants of the digital switch, trying search with MC74HCT4051A. It has an internal resistance of 100Ohm. Datasheets for functions of 16 pins are available. It is generally not recommended to supply a voltage higher than 6V to the switch device in normal circumstances. A analog switch ic that has a cost-effective Single supply type. The lowest voltage the electronic part should receive is 2V. In order to operate this switch device, it would need a current of 1μA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 6V. The voltage should be at least 1V if you are using dual power supplies. A 8 input needs to be operated.
MC74HCT4051ADTG Features
8 Channels
1μA Supply Current
-3db Bandwidth: 80MHz
MC74HCT4051ADTG Applications
There are a lot of ON Semiconductor MC74HCT4051ADTG Analog Switches & Multiplexers ICs applications.
- Communication systems
- PBX interfaces
- Isolation
- High reliability control systems
- Multiplexers
- Battery-powered systems
- Industrial control systems
- Automatic test equipment
- FTTH
- ATM
