MC74HCT4053ADR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 3 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| JESD-30 Code | R-XDSO-G16 |
| Number of Channels | 2 |
| Number of Circuits | 3 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±2V~6V |
| -3db Bandwidth | 80MHz |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 130pF |
| On-state Resistance Match-Nom | 30Ohm |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-off Time-Max | 220ns |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HCT4053ADR2G Overview
Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Multiplexers like this are mounted in the Surface Mount position. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Extended operating temperature around -55°C~125°C TA. A total of 16 terminations have been recorded. The electronic part delivers high-quality output through its 2 channels. An 4.5V voltage supply should allow the electrical part to be turned on and run. This electronic part can be found in the 16 series. Circuits number 3 make up this analogue multiplexer. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module.
MC74HCT4053ADR2G Features
2 Channels
-3db Bandwidth: 80MHz
MC74HCT4053ADR2G Applications
There are a lot of ON Semiconductor MC74HCT4053ADR2G Analog Switches & Multiplexers ICs applications.
- ISDN NT1/TA
- DSUs
- SDH/SONET multiplexers
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Medical
- Channelized and Unchannelized DS3 applications
- USB 1.1 signal switching circuits
- Communication systems
- RGB switches
- Fiber to the Home
