MC74HCT4066ADR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 19 hours ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Resistance | 120Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Power Dissipation | 500mW |
| Propagation Delay | 15 ns |
| Number of Inputs | 4 |
| Halogen Free | Halogen Free |
| -3db Bandwidth | 150MHz |
| On-State Resistance (Max) | 120Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 30Ohm |
| Switch Circuit | SPST - NO |
| Channel-to-Channel Matching (ΔRon) | 20 Ω |
| Switch-on Time-Max | 37ns |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Normal Position | NO |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HCT4066ADR2G Overview
The electronic component is convenient to ship overseas because it is packed in a 14-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. The multiplexer is located in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. An extended operating temperature of -55°C~125°C TA degrees Celsius. There are 14 terminations totally. A 1 channel electronic part produces high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. There are 14 pins injected into the electronic part body. Unlike digital switches, these are based on SPST - NO switching circuits. Internally, this switch multiplexer has a resistance of 120Ohm. To find out what the functions of 14 pins are, please refer to their datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 5.5V to a switch device. The lowest voltage the electronic part should receive is 4.5V. The voltage required by this switch device is 4.5V~5.5V, draining from a single voltage supply. This analog switch ic utilizes SEPARATE OUTPUT output. This electrical part is compatible with 5V operating voltages. The electrical component supports 4 inputs.
MC74HCT4066ADR2G Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 150MHz
MC74HCT4066ADR2G Applications
There are a lot of ON Semiconductor MC74HCT4066ADR2G Analog Switches & Multiplexers ICs applications.
- Audio and video routing
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Cellular phones
- Industrial control systems
- Cell phones
- Frame Relay Equipment
- Sample hold systems
- Access Concentrators
- New designs requiring multiplexer functions
- Power routing
