MC74HCT4851ADG
| Parameters | |
|---|---|
| Base Part Number | MC74HCT4851A |
| Pin Count | 16 |
| Power Supplies | 5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 2μA |
| Power Dissipation | 500mW |
| Logic Function | Demultiplexer, Multiplexer |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.04mA |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Number of Input Lines | 11 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 40pF |
| On-state Resistance Match-Nom | 80Ohm |
| Switch-on Time-Max | 40ns |
| Switch-off Time-Max | 40ns |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Signal Current-Max | 0.025A |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 400Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
MC74HCT4851ADG Overview
As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. The advanced packaging method Tube provides high reliability. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a number of circuits 8:1. Operational temperature extended around -55°C~125°C TA. In total, 16 terminations have occurred. This electronic part offers high-quality output due to its 8 channels. With a 5V voltage supply, the electrical component should be turned on and run. This electrical component is included in the 16 series of products. There are 1 circuits in this switch device. Use MC74HCT4851A to search for variants of the digital switches. Analog switches have 400Ohm internal resistance. The datasheets for the 16 pins explain the functions. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 5.5V should not normally be supplied to the switches. Single supply type digital switch with a low cost. 4.5V should be the lowest voltage fed to the electronic component. It would be sufficient to run this analogue multiplexer with 2μA current. This analogue multiplexer requires a voltage of 4.5V~5.5V when it drains from a single voltage supply.
MC74HCT4851ADG Features
8 Channels
2μA Supply Current
MC74HCT4851ADG Applications
There are a lot of ON Semiconductor MC74HCT4851ADG Analog Switches & Multiplexers ICs applications.
- Audio and video switching
- High speed data transmission line cards
- 65 V DACs
- Relay replacements
- PCMCIA cards
- Isolation
- Sample-and-hold systems
- DSUs
- Precision instrumentation
- Microwave transmission systems
