MC74HCT4851ADTG
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 400Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MC74HCT4851A |
| Pin Count | 16 |
| Power Supplies | 5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 2μA |
| Power Dissipation | 450mW |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.04mA |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Number of Input Lines | 11 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 40pF |
| On-state Resistance Match-Nom | 80Ohm |
| Switch-on Time-Max | 40ns |
| Switch-off Time-Max | 40ns |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Signal Current-Max | 0.025A |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
MC74HCT4851ADTG Overview
Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 8:1. The operating temperature is extended to around -55°C~125°C TA. In total, 16 terminations have occurred. The electronic part provides high-quality output because it has 8 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. This electrical component is included in the 16 series of products. The multiplexer consists of 1 circuits. MC74HCT4851A can be used to search for analog multiplexer variants. The internal resistance of this digital multiplexer is 400Ohm. The functions of 16 pins can be found in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. normally, users should not supply switches with voltages higher than 6V. The analog switch ic is of the Single supply type and is cost-effective. 2V should be the lowest voltage fed to the electronic component. An operating current of 2μA would be sufficient for this switch device. Draining from a single voltage supply, this analog switch requires a voltage of 4.5V~5.5V. The electrical component supports 8 inputs.
MC74HCT4851ADTG Features
8 Channels
2μA Supply Current
MC74HCT4851ADTG Applications
There are a lot of ON Semiconductor MC74HCT4851ADTG Analog Switches & Multiplexers ICs applications.
- Medical systems
- Ultrasound
- Mechanical reed relay replacement
- Audio/video switches
- Industrial and process control systems
- Cellular phones
- Power routing
- SDH
- Remote wireless modules
- Communications systems
