MC74HCT4852ADG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 600Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MC74HCT4852A |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 2μA |
| Power Dissipation | 500mW |
| Propagation Delay | 45 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.04mA |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 40pF |
| On-state Resistance Match-Nom | 80Ohm |
| Switch Circuit | SP4T |
| Switch-on Time-Max | 40ns |
| Switch-off Time-Max | 40ns |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HCT4852ADG Overview
Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tube. In Surface Mount, this analog switch is mounted. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Around -55°C~125°C TA is the extended operating temperature. In total, there are 16 terminations. A 4 channel electronic part produces high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. It is injected into the electrical part body with 16 pins. SP4T switching circuits are used in these analog switch ics. Circuits number 2 make up this analogue multiplexer. If you are looking for variants of the digital switch, trying search with MC74HCT4852A. A 600Ohm internal resistance characterizes this multiplexer. Datasheets for 16 pin functions are available upon request. It is a typical Multiplexer or Switches analog multiplexer. normally, users should not supply switches with voltages higher than 5.5V. The analog switch ic is of the Single supply type and is cost-effective. It is recommended that the electrical component receives a voltage of 4.5V. This digital switch can be operated with a current of 2μA. A voltage of 4.5V~5.5V is required for this switch device, which drains from a single voltage source. It can operate from 5V operating voltages. A 8 input needs to be operated.
MC74HCT4852ADG Features
4 Channels
Switch Circuit: SP4T
2μA Supply Current
MC74HCT4852ADG Applications
There are a lot of ON Semiconductor MC74HCT4852ADG Analog Switches & Multiplexers ICs applications.
- Audio and video switching
- High-Voltage
- Automotive applications
- Relay Replacement
- PCMCIA cards
- SONET/SDH ADM
- Multi-Line E1 Interface Cards
- Communications systems
- Battery Powered Instruments
- Intelligent PBX
