MC74HCT4852ADTG
| Parameters | |
|---|---|
| Channel Capacitance (CS(off), CD(off)) | 40pF |
| On-state Resistance Match-Nom | 80Ohm |
| Switch Circuit | SP4T |
| Switch-on Time-Max | 40ns |
| Switch-off Time-Max | 40ns |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 600Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MC74HCT4852A |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 2μA |
| Power Dissipation | 450mW |
| Propagation Delay | 45 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.04mA |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
MC74HCT4852ADTG Overview
Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tube. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 4:1. Around -55°C~125°C TA is the extended operating temperature. Total terminations are 16. A electrical component with 4 channels is capable of high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. An electrical component like this is included in the 16 series. On the other hand, analog switches can be constructed using SP4T switching circuits. This multiplexer is composed of 2 circuits. Using the MC74HCT4852A search parameter, you can discover variants of the switch. The internal resistance of this digital multiplexer is 600Ohm. The functions of 16 pins can be found in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. A cost-effective Single supply type analogue multiplexer. It is recommended that the electrical component receives a voltage of 4.5V. For this digital switch to work, 2μA current would suffice. An analogue multiplexer drains from a single voltage supply at 4.5V~5.5V. The electronic component can function from 5V. Operating 8 inputs is required.
MC74HCT4852ADTG Features
4 Channels
Switch Circuit: SP4T
2μA Supply Current
MC74HCT4852ADTG Applications
There are a lot of ON Semiconductor MC74HCT4852ADTG Analog Switches & Multiplexers ICs applications.
- Routers
- MP3 players
- PBXs
- PCMCIA cards
- Access Concentrators
- Communication systems
- E1 Network Equipment
- Cross Connects
- Remote wireless modules
- ATM
