MC74HCT573ADTR2
| Parameters | |
|---|---|
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HCT573 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 30 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 45 ns |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74HCT |
MC74HCT573ADTR2 Overview
The package in which it is embedded is named 20-TSSOP (0.173, 4.40mm Width). Packaged in the way of Tape & Reel (TR). It uses Tri-State as its output configuration. In this electrical device, the logic type is D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. It operates at a voltage of 4.5V~5.5V. It operates at -55°C~125°C degrees Celsius. The 74HCT series of FPGAs is the one this FPGA belongs to. The design of this electronic part is based on 8 bits. In this device, there are 20 terminations. The family in which it belongs to is 74HCT573. In order to function, the supply voltage should be set to 5V. 20 pins are available on it. HCT is the family name of this electronic device. The pin configuration of the device is 20. Mounting this electronic component follows the Surface Mount method. In this device, there are 2 ports. There is a subcategory of FF/Latches for this part. The device is powered by 5V power supplies. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. Based on its reliable performance, this device is well suited to TAPE AND REEL. The supply voltage should be maintained at 5V for high efficiency. The binary equivalent of the input line is generated by 3 output lines.
MC74HCT573ADTR2 Features
20-TSSOP (0.173, 4.40mm Width) package
74HCT series
8 Bits
74HCT573 family
20 pin count
20 pins
5V power supplies
MC74HCT573ADTR2 Applications
There are a lot of ON Semiconductor MC74HCT573ADTR2 Latches applications.
- Serial Output Data Queuing
- Four-bit storage with output enable
- Double bus register system
- Bus system register with enable parallel lines at bus side
- Timers
- High-speed logic
- Automotive Infotainment
- Registers
- General-Purpose Register
- Multi-line decoders
