MC74HCT573ADTR2G
| Parameters | |
|---|---|
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 50mA |
| Output Current | 6mA |
| Number of Bits | 8 |
| Propagation Delay | 30 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 30 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 45 ns |
| Number of Output Lines | 8 |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HCT573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
MC74HCT573ADTR2G Overview
The package in which it is embedded is named 20-TSSOP (0.173, 4.40mm Width). Tape & Reel (TR) is the way it is packaged. It uses the output configuration Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. With a supply voltage of 4.5V~5.5V, it operates. There is -55°C~125°C operating temperature. 74HCT is the series number of this FPGA. Electronic parts with 8 bits are designed for this application. This device has been designed with 20 terminations available. It is a member of the 74HCT573 family. The device works with a voltage of 5V for its supply voltage. 20 pins are available on it. HCT is the family of this electronic device. With the design of the board, there are only 20 pins. The electronic part is mounted using the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Subcategory FF/Latches contains this part. There are 5V power supplies attached to it. On the basis of its reliability, this device is well suited for TAPE AND REEL. The 6mA output current gives it maximum design flexibility. A high level of efficiency is achieved by maintaining the supply voltage at 5V. It follows that 8 output lines are generated from the binary equivalent of the input line. It consumes 4μA current from its quiescent state without being affected by external factors at all. A total of 1 elements make up this object.
MC74HCT573ADTR2G Features
20-TSSOP (0.173, 4.40mm Width) package
74HCT series
8 Bits
74HCT573 family
20 pin count
20 pins
5V power supplies
1 elements
MC74HCT573ADTR2G Applications
There are a lot of ON Semiconductor MC74HCT573ADTR2G Latches applications.
- Frequency dividing
- Four-bit storage with output enable
- A/D and D/A conversion
- Counter control
- Parallel Input
- Registers
- Bus system register with enable parallel lines at bus side
- PCs and Notebooks
- Storage
- Watches
