MC74HCT573ADWR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 800.987426mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74HCT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HCT573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Max Supply Current | 4μA |
| Number of Bits | 8 |
| Propagation Delay | 45 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 30 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height | 2.4mm |
| Length | 12.95mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HCT573ADWR2G Overview
A package called 20-SOIC (0.295, 7.50mm Width) contains it. As a result, it has a packaging of Tape & Reel (TR). It is configured with an output of Tri-State. This electrical device has a logic type of D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. It operates at -55°C~125°C degrees Celsius. The 74HCT series of FPGAs is the one this FPGA belongs to. An electronic part with 8 bits is designed. As far as this device is concerned, it has no terminations. This type belongs to the 74HCT573 family. In order to function, the supply voltage should be set to 5V. 20 pins are available on it. It is part of the family of electronic devices called HCT. With the design of the board, there are only 20 pins. Mounting this electronic component follows the Surface Mount method. In this device, there is a total of 2 ports available for use. It belongs to the subcategory of FF/Latches. A total of 5V power supplies are required for it to operate. Its reliable performance makes it an excellent choice for TAPE AND REEL. High efficiency requires a supply voltage of 5V. Regardless of the input line, the binary equivalent of the input line will be generated by the 3 output lines. Without external influences, it consumes 4μA quiescent current. 8 circuits enable it to achieve high performance.
MC74HCT573ADWR2G Features
20-SOIC (0.295, 7.50mm Width) package
74HCT series
8 Bits
74HCT573 family
20 pin count
20 pins
5V power supplies
MC74HCT573ADWR2G Applications
There are a lot of ON Semiconductor MC74HCT573ADWR2G Latches applications.
- Stacked or Push-Down Registers
- Automotive Body Electronics
- Counters
- Multi-line decoders
- High-speed logic
- Up/down difference counting
- Relay
- Multistage ripple counting
- BCD counting
- Display driver
