banner_page

MC74HCT573AFELG

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74HCT Series 74HCT573 20 Pins DUAL CMOS 20-SOIC (0.209, 5.30mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-MC74HCT573AFELG
  • Package: 20-SOIC (0.209, 5.30mm Width)
  • Datasheet: PDF
  • Stock: 871
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74HCT Series 74HCT573 20 Pins DUAL CMOS 20-SOIC (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 5V
Base Part Number 74HCT573
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Number of Ports 2
Number of Bits 8
Propagation Delay 30 ns
Turn On Delay Time 30 ns
Family HCT
Logic Function D-Type, Latch
Current - Output High, Low 6mA 6mA
Logic Type D-Type Transparent Latch
Number of Input Lines 8
Independent Circuits 1
Number of Output Lines 3
Height Seated (Max) 2.05mm
Width 5.275mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.209, 5.30mm Width)
Number of Pins 20
Operating Temperature -55°C~125°C
Packaging Tube
Published 2011
Series 74HCT
JESD-609 Code e4
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL

MC74HCT573AFELG Overview


The 20-SOIC (0.209, 5.30mm Width) package contains it. This package has the format of Tube. It uses Tri-State as its output configuration. A D-Type Transparent Latch logic type is used in this electrical device. This electronic part is mounted in the way of Surface Mount. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. It operates at -55°C~125°C degrees Celsius. An FPGA of this type belongs to the 74HCT series. The electronic part in this image has 8 bits. A device with this design has 20 terminations. This type belongs to the 74HCT573 family. In order to function, the supply voltage should be set to 5V. It has 20 pins that makes it easy to use. This electronic device belongs to the family of HCT. The device has 20 pins. It is mounted according to the Surface Mount method. In this device, there is a total of 2 ports available for use. In the circuit, there are 8 input lines that are constituted by an electronic circuit. For maximum efficiency, the supply voltage should be set to 5V. 3 output lines provide binary equivalents of input lines.

MC74HCT573AFELG Features


20-SOIC (0.209, 5.30mm Width) package
74HCT series
8 Bits
74HCT573 family
20 pin count
20 pins

MC74HCT573AFELG Applications


There are a lot of ON Semiconductor MC74HCT573AFELG Latches applications.

  • Watches
  • Bus system register with enable parallel lines at bus side
  • Data acquisition
  • Frequency
  • Counters
  • BCD counting
  • Parallel Input
  • Shift Registers
  • Meter applications
  • Stacked or Push-Down Registers

Write a review

Note: HTML is not translated!
    Bad           Good