MC74HCT573AN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Published | 2009 |
| Series | 74HCT |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HCT573 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 30 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 45 ns |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height Seated (Max) | 4.57mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HCT573AN Overview
In the 20-DIP (0.300, 7.62mm) package, it is embedded. Tube is the way in which it is packaged. It is configured with an output of Tri-State. D-Type Transparent Latch is the logic type of this electrical device. This electronic part is mounted in the way of Through Hole. The supply voltage of the device is 4.5V~5.5V. It operates at -55°C~125°C degrees Celsius. It is a type of FPGA belonging to the 74HCT series. This electronic part is designed with 8 Bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. As a member of the 74HCT573 family, it falls under that category. The device works with a voltage of 5V for its supply voltage. There are 20 pins on it. It is a member of the HCT family of electronic devices. With the design of the board, there are only 20 pins. A Through Hole mounting method has been used for this electronic part. In this device, there is a total of 2 ports available for use. Subcategory FF/Latches includes this part. Vsup reaches 5.5V as the maximum supply voltage. It operates from 5V power supplies. If the supply voltage (Vsup) is greater than 4.5V, then the device is working correctly. 3 output lines generate the binary equivalent of the input lines. It achieves superior flexibility by using 8 circuits.
MC74HCT573AN Features
20-DIP (0.300, 7.62mm) package
74HCT series
8 Bits
74HCT573 family
20 pin count
20 pins
5V power supplies
MC74HCT573AN Applications
There are a lot of ON Semiconductor MC74HCT573AN Latches applications.
- Parallel Input
- Hammer
- Up-Down Johnson
- Frequency dividing
- Pseudo-random code generators
- Digital bus buffer
- Storage
- Automotive ADAS
- Shift left with parallel loading
- Serial Output Register
