MC74HCT74AN
| Parameters | |
|---|---|
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Clock Frequency | 30MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 4mA 4mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 24ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Propagation Delay (tpd) | 36 ns |
| Height Seated (Max) | 4.69mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
MC74HCT74AN Overview
The item is packaged in 14-DIP (0.300, 7.62mm)cases. D flip flop is embedded in the Tube package. In the configuration, Differentialis used as the output. It is configured with the trigger Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. With a supply voltage of 4.5V~5.5V volts, it operates. A temperature of -55°C~125°C TAis used in the operation. It belongs to the type D-Typeof flip flops. The 74HCTseries comprises this type of FPGA. In order for it to function properly, its output frequency should not exceed 30MHz. A total of 2 elements are present. There is a consumption of 2μAof quiescent energy. A total of 14 terminations have been made. Power is provided by a 5V supply. This T flip flop has a capacitance of 10pF farads at the input. It is a member of the HCTfamily of D flip flop. It reaches the maximum supply voltage (Vsup) at 5.5V. Normally, the supply voltage (Vsup) should be above 4.5V.
MC74HCT74AN Features
Tube package
74HCT series
MC74HCT74AN Applications
There are a lot of Rochester Electronics, LLC MC74HCT74AN Flip Flops applications.
- Memory
- EMI reduction circuitry
- ESD performance
- Supports Live Insertion
- Bus hold
- Bounce elimination switch
- 2 – Bit synchronous counter
- Instrumentation
- Circuit Design
- Differential Individual
