MC74HCT74AN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | 74HCT |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HCT74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 30MHz |
| Propagation Delay | 24 ns |
| Turn On Delay Time | 24 ns |
| Family | HCT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 24ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 4.69mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HCT74AN Overview
The flip flop is packaged in 14-DIP (0.300, 7.62mm). It is contained within the Tubepackage. Differentialis the output configured for it. The trigger configured with it uses Positive Edge. Through Holeis in the way of this electric part. A voltage of 4.5V~5.5Vis required for its operation. A temperature of -55°C~125°C TAis used in the operation. The type of this D latch is D-Type. The 74HCTseries comprises this type of FPGA. You should not exceed 30MHzin its output frequency. As a result, it consumes 2μA of quiescent current without being affected by external factors. The number of terminations is 14. The 74HCT74 family contains this object. An input voltage of 5Vpowers the D latch. This T flip flop has a capacitance of 10pF farads at the input. The electronic device belongs to the HCTfamily. A part of the electronic system is mounted in the way of Through Hole. There are 14pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This RS flip flops is a part number FF/Latches. Its superior flexibility is attributed to its use of 2 circuits. This D flip flop is well suited for RAIL based on its reliable performance. It operates from 5V power supplies. In order to achieve high efficiency, the supply voltage should be maintained at 5V. In order to operate, the chip has 1 output lines.
MC74HCT74AN Features
Tube package
74HCT series
14 pins
5V power supplies
MC74HCT74AN Applications
There are a lot of ON Semiconductor MC74HCT74AN Flip Flops applications.
- Memory
- Balanced Propagation Delays
- Balanced 24 mA output drivers
- Supports Live Insertion
- EMI reduction circuitry
- ATE
- Shift registers
- Computing
- Individual Asynchronous Resets
- Buffered Clock
