MC74HCT74ANG
| Parameters | |
|---|---|
| Family | HCT |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 4mA 4mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 24ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Propagation Delay (tpd) | 36 ns |
| Height Seated (Max) | 4.69mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Clock Frequency | 30MHz |
MC74HCT74ANG Overview
The item is packaged in 14-DIP (0.300, 7.62mm)cases. It is contained within the Tubepackage. T flip flop uses Differentialas its output configuration. It is configured with the trigger Positive Edge. There is an electronic component mounted in the way of Through Hole. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. In this case, the operating temperature is -55°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. This type of FPGA is a part of the 74HCT series. Its output frequency should not exceed 30MHz. The list contains 2 elements. During its operation, it consumes 2μA quiescent energy. A total of 14terminations have been recorded. A voltage of 5V provides power to the D latch. The input capacitance of this T flip flop is 10pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. Devices in the HCTfamily are electronic devices. The maximal supply voltage (Vsup) reaches 5.5V. For normal operation, the supply voltage (Vsup) should be kept above 4.5V.
MC74HCT74ANG Features
Tube package
74HCT series
MC74HCT74ANG Applications
There are a lot of Rochester Electronics, LLC MC74HCT74ANG Flip Flops applications.
- Bounce elimination switch
- Circuit Design
- Buffered Clock
- Digital electronics systems
- Patented noise
- High Performance Logic for test systems
- QML qualified product
- Automotive
- Single Up Count-Control Line
- Storage registers
