MC74HCT74ANG
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 4.535924g |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 74HCT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 4mA |
| Clock Frequency | 30MHz |
| Propagation Delay | 24 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 24 ns |
| Family | HCT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 24ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 6.35mm |
| Length | 6.35mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74HCT74ANG Overview
It is packaged in the way of 14-DIP (0.300, 7.62mm). A package named Tubeincludes it. Currently, the output is configured to use Differential. In the configuration of the trigger, Positive Edgeis used. There is an electric part mounted in the way of Through Hole. A voltage of 4.5V~5.5Vis required for its operation. In the operating environment, the temperature is -55°C~125°C TA. It is an electronic flip flop with the type D-Type. In FPGA terms, D flip flop is a type of 74HCTseries FPGA. It should not exceed 30MHzin terms of its output frequency. Currently, there are 14 terminations. JK flip flop belongs to 74HCT74 family. It is powered by a voltage of 5V . This JK flip flop has a 10pFfarad input capacitance. In this case, the D flip flop belongs to the HCTfamily. A part of the electronic system is mounted in the way of Through Hole. Basically, it is designed with a set of 14 pins. Its clock edge trigger type is Positive Edge. It is part of the FF/Latchesbase part number family. To achieve this superior flexibility, 2 circuits are used. A reliable performance of this D flip flop makes it well suited for use in RAIL. In order for the device to operate, it requires 5V power supplies. For high efficiency, the supply voltage should be kept at 5V. With an output current of 4mA, it is possible to design the device in any way you want. It operates with 1 output lines. This D latch consumes 2μA quiescent current at all.
MC74HCT74ANG Features
Tube package
74HCT series
14 pins
5V power supplies
MC74HCT74ANG Applications
There are a lot of ON Semiconductor MC74HCT74ANG Flip Flops applications.
- ESD performance
- Individual Asynchronous Resets
- Safety Clamp
- Dynamic threshold performance
- Differential Individual
- Clock pulse
- ESD protection
- Instrumentation
- Reduced system switching noise
- Functionally equivalent to the MC10/100EL29
