MC74LCX139DT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| Series | 74LCX |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LCX139 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 2:4 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Throw Configuration | DP4T |
| Family | LVC/LCX/Z |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Output Polarity | INVERTED |
| Propagation Delay (tpd) | 9.3 ns |
| Power Supply Current-Max (ICC) | 0.01mA |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Number of Output Lines | 4 |
| Input Conditioning | STANDARD |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74LCX139DT Overview
Digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width) for the purpose of saving board space.As a result, it is packaged in a way that is referred to as Tube.digital switch ic uses the method of Surface Mount for mounting.A digital IC Decoder/Demultiplexer is used as the analog component of the multiplexers.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 2V~3.6V supply voltage.Multiplexers in the 74LCX series are suitable for a wide range of applications.Among its basic features are 16 terminations.To find signal switch's related components, a base part number of 74LCX139 may also be used.For multiplexer's system, a voltage of 2.7V is supplied.Signal switch has 16 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply Single that is employed in this case.A total of 16 pins are configured on this board.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is included into the family of LVC/LCX/Z.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 2V.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.For mux switch's normal operation, there is a power supply provided at 3.3V.The digital switch ic is a part of an electronic system classified as Decoder/Drivers.RAIL is used to package the switches.It is possible to accept voltage levels by using one of the 2 input lines of multiplexers.A signal source is provided by 4 output lines.
MC74LCX139DT Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
2 input lines
4 output lines
MC74LCX139DT Applications
There are a lot of ON Semiconductor MC74LCX139DT Signal Switches / Multiplexers / Decoders applications.
- D/A converters
- Solenoid cooling fan
- Microprocessor memory systems
- To select different task for memory in microprocessor memory systems
- Automatic Monitoring systems
- Used to connect a single source to multiple destinations
- Arithmetic Logic Units
- Logic circuits
- Computer memory
- Control unit of Central Processing unit (CPU)
