MC74LCX139DT
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74LCX |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | COMMERCIAL |
| Circuit | 1 x 2:4 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2V |
| Family | LVC/LCX/Z |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | INVERTED |
| Propagation Delay (tpd) | 9.3 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Input Conditioning | STANDARD |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
MC74LCX139DT Overview
Providing this information in the 16-TSSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.It is packaged in the way of Tube.Mounting is performed using Surface Mount.A digital IC Decoder/Demultiplexer is used as the analog component of the multiplexers.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.Using a 2V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers can be used for a wide range of applications since they are members of 74LCX series.There are 16 terminations included in its basic configuration.The multiplexer's system is supplied with a voltage of 2.7V.A component pin count of 16 is found on this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.The logic switch belongs to the family of LVC/LCX/Z.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2V.Avoid unnecessary failures by keeping Vsup at 3.6V.
MC74LCX139DT Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
MC74LCX139DT Applications
There are a lot of Rochester Electronics, LLC MC74LCX139DT Signal Switches / Multiplexers / Decoders applications.
- Recording transmission
- Relay
- Make full adder
- A robotic vehicle with the metal detector
- Small scale TV wall
- CPU memory location identification
- Video transmission
- Automatic Monitoring systems
- Textile mills
- Memory system of computers
