MC74LCX139MEL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | 74LCX |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LCX139 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 2:4 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Throw Configuration | DP4T |
| Family | LVC/LCX/Z |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Output Polarity | INVERTED |
| Propagation Delay (tpd) | 9.3 ns |
| Power Supply Current-Max (ICC) | 0.01mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Number of Output Lines | 4 |
| Input Conditioning | STANDARD |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74LCX139MEL Overview
Due to the fact that it is provided in the 16-SOIC (0.209, 5.30mm Width), digital switch allows the board to be compacted.The package is in the form of Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.A digital IC Decoder/Demultiplexer is used as the analog component of the multiplexers.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.Design engineers have more flexibility when digital controlled switch operates at 2V~3.6V voltage.These multiplexers are members of the 74LCX series, which provide extensive application potential.Among its basic configurations are 16 terminations.You can also find related parts by using its logic switch base part number of 74LCX139.The multiplexer is supplied with 2.7V voltage.Currently, this turn signal switch has a total of 16 component pins.As a result, GULL WING represents the end of the conductors.The supply type of this multiplexer ic is Single.Currently, it is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the LVC/LCX/Z family.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2V.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.The power supply of 3.3V is provided for mux switch's normal operation.Part number Decoder/Drivers indicates that the digital switch ic is an electronic part.The switches package is packaged in a way which is consistent with TAPE AND REEL.A signal source consists of 4 output lines.
MC74LCX139MEL Features
Supplied in the 16-SOIC (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
4 output lines
MC74LCX139MEL Applications
There are a lot of ON Semiconductor MC74LCX139MEL Signal Switches / Multiplexers / Decoders applications.
- Seven segment displays
- Memory system of computers
- Used to connect a single source to multiple destinations
- Robotic vehicles
- Data transfer
- Memory chips
- Make full adder
- Implementing boolean functions with multiple variables
- Metal detectors
- VGA
