MC74LCX157DT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| Series | 74LCX |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LCX157 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Throw Configuration | DPST |
| Propagation Delay | 5.8 ns |
| Family | LVC/LCX/Z |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Output Polarity | TRUE |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74LCX157DT Overview
It is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save board space.Tube represents its packaging.In terms of mounting, digital switch ic uses the method of Surface Mount.The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Designers have greater flexibility using digital controlled switch when it works with 2V~3.6V voltage.The multiplexers from 74LCX series can be used for a wide range of applications.It is designed with 16 terminations as part of its basic configuration.Its logic switch base part number is 74LCX157 which can also be used to find its logic switch related parts.The voltage supplied for multiplexer's system is 3.3V.multiplexer's systemThere are 16 component pins in this turn signal switch.As a result, GULL WING represents the end of the conductors.Single is employed as its supply type.Currently, it is configured with a 16 pin configuration.This unit is mounted in the way of Surface Mount.The logic switch is included into the family of LVC/LCX/Z.In the signal multiplexer, there are 4 bits available.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 2V.It is advisable that the maximal supply voltage (Vsup) remains at 3.6V to avoid some unnecessary failures.For mux switch's normal operation, there is a power supply provided at 3.3V.As a result, the turn signal switch consists of 1 outputs.The switches packaging is based on RAIL.The multiplexers have 2 input lines used to accept voltage levels.
MC74LCX157DT Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
2 input lines
MC74LCX157DT Applications
There are a lot of ON Semiconductor MC74LCX157DT Signal Switches / Multiplexers / Decoders applications.
- Make full adder
- Seven segment displays
- A/D converters
- Enabling different functions units in microprocessor instruction decoding
- Enabling block of memory depending on address in memory chips
- Combinational circuit
- Used to connect a single source to multiple destinations
- Electronically controlled engine system
- LVDS
- Paper plants
