MC74LCX158MELG
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LCX158 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Throw Configuration | DPST |
| Propagation Delay | 6.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | Multiplexer, Mux |
| Number of Inputs | 8 |
| Current - Output High, Low | 8mA 8mA |
| Supply Type | Single |
| Output Polarity | INVERTED |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| Series | 74LCX |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
MC74LCX158MELG Overview
In order to save board space, digital switch is located in the 16-SOIC (0.209, 5.30mm Width).Tape & Reel (TR) represents its packaging.The mounting method digital switch ic uses is Surface Mount.As the analog part, the circuit uses an analog IC Multiplexer.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2V~3.6V, designers are provided with a greater degree of flexibility.With the 74LCX series, the multiplexers are suitable for a diverse range of applications.Its basic configuration includes terminations in the 16 range.There is a base part number 74LCX158 that can be used to locate signal switch's related components as well.The multiplexer is supplied with 2.7V voltage.There are 16 component pins in this turn signal switch.Conductors terminate at GULL WING in this design.The supply type of this multiplexer ic is Single.This multiplexer ic is configured with 16 pins.The mount is in Surface Mount.In the LVC/LCX/Z family, the logic switch is included.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 2V.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.For mux switch's normal operation, power supply 3.3V is provided.In order for the turn signal switch to work, there are 4 outputs.This multiplexer is equipped with 8 inputs and 8 outputs.TAPE AND REEL is used to package the switches.It is possible to accept voltage levels through 2 input lines of multiplexers.
MC74LCX158MELG Features
Supplied in the 16-SOIC (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
2 input lines
MC74LCX158MELG Applications
There are a lot of ON Semiconductor MC74LCX158MELG Signal Switches / Multiplexers / Decoders applications.
- Implementing boolean functions with multiple variables
- Data bus control
- Recording transmission
- Arithmetic Logic Units
- Enabling different functions units in microprocessor instruction decoding
- Frequency multiplexing system
- Code converters
- Time division multiplexing system
- VGA
- Enabling block of memory depending on address in memory chips
