MC74LCX16244DTR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| Packaging | Tape and Reel |
| Published | 2000 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Number of Outputs | 16 |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2V |
| Power Dissipation-Max | 200mW |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Propagation Delay | 4.5 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 7.2 ns |
| Family | LVC/LCX/Z |
| Logic Function | Buffer, Inverting |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 8 |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Control Type | ENABLE LOW |
| Number of Output Lines | 3 |
| Height Seated (Max) | 1.1mm |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
MC74LCX16244DTR2 Overview
Logical driver uses a neat TSSOP package. Tape and Reel external packaging. All of the 2 elements are put into use. 48 terminations with different functions. Buffer IC reuqires a supply voltage of 2.5V. In the LVC/LCX/Z family, the electric component belongs. 48 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 48 pins. Enhanced with 2 ports. The bus transceiver employs 8 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 20μA. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 24mA to its low level. In high level output mode, the electronic parts may conduct -24mA of current. Voltage used to run voltage buffer should be 2V at least. In regard to the maximum supply voltage, buffer driver is rated 3.6V. Wireless transceiver is able to output 3 lines. It is known as a BUS DRIVER logic IC. It is sufficient to make 16 outputs.
MC74LCX16244DTR2 Features
Bus Driver/Transceivers
High Level Output: 24mA
Low Level Output: -24mA
BUS DRIVER Logic IC
MC74LCX16244DTR2 Applications
There are a lot of ON Semiconductor MC74LCX16244DTR2 Buffers & Transceivers applications.
- Cable network front end
- Wireless access points
- Telecom and datacom networking applications
- Remote controls
- Broadcast application
- Clock radio
- Carrier phase observations
- IPTV front end
- Relays
- Lamps
