MC74LCX373DWR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 800.987426mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74LCX |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LCX373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Max Supply Current | 10μA |
| Number of Bits | 8 |
| Propagation Delay | 8 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74LCX373DWR2G Overview
The 20-SOIC (0.295, 7.50mm Width) package contains it. A package of Tape & Reel (TR) has been used. It uses Tri-State as its output configuration. The Logic type of this electrical device is D-Type Transparent Latch. This electronic part is mounted in the way of Surface Mount. The supply voltage of the device is 2V~3.6V. A temperature of -40°C~85°C is set as the operating temperature. This FPGA is part of the 74LCX series. This electronic part is designed with 8 Bits. A device such as this has 20 terminations designed. It is a member of the 74LCX373 family. A 2.5V voltage supply is required for operation. There are 20 pins on it. This electronic device is categorized as a LVC/LCX/Z electronic device. It is designed with 20 pins. The electronic part is mounted in a way that corresponds to Surface Mount. In this device, there are 2 ports. This part can be found within the FF/Latches subcategory. It is recommended to have a higher supply voltage (Vsup) than 2V. Its reliable performance makes it an excellent choice for TAPE AND REEL. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. As far as external factors are concerned, it consumes 10μA of quiescent current without getting affected by them. The superior flexibility of the system is achieved through its use of 8 circuits.
MC74LCX373DWR2G Features
20-SOIC (0.295, 7.50mm Width) package
74LCX series
8 Bits
74LCX373 family
20 pin count
20 pins
MC74LCX373DWR2G Applications
There are a lot of ON Semiconductor MC74LCX373DWR2G Latches applications.
- Shift register
- Parallel-to-Serial Data Conversion
- High-speed logic
- Up/down difference counting
- Automotive Cluster
- Digital bus buffer
- Relay
- Avionics
- Double bus register system
- Parallel data synchronization
