MC74LCX373MEL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74LCX |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LCX373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74LCX373MEL Overview
The 20-SOIC (0.209, 5.30mm Width) package contains it. A Tape & Reel (TR) package is used to package it. Tri-State is the output configured for it. This electrical device has Logic type D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. A voltage of 2V~3.6V is used as the supply voltage for this device. A temperature of -40°C~85°C is used for operation. An FPGA of this type belongs to the 74LCX series. Electronic parts with 8 bits are designed for this application. A device with this design has 20 terminations. As a member of the 74LCX373 family, it falls under that category. A 2.5V voltage supply is required for operation. There are 20 pins on it. In the world of electronics, this electronic device belongs to the family of LVC/LCX/Z. 20 pins are used in its design. Electronic parts are mounted using the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The part belongs to the FF/Latches subcategory. Ensure that the supply voltage (Vsup) is greater than 2V. In the circuit, there are 3 input lines that are constituted by an electronic circuit. On the basis of its reliability, this device is well suited for TAPE AND REEL. In order to achieve its superior flexibility, 8 circuits are used.
MC74LCX373MEL Features
20-SOIC (0.209, 5.30mm Width) package
74LCX series
8 Bits
74LCX373 family
20 pin count
20 pins
MC74LCX373MEL Applications
There are a lot of ON Semiconductor MC74LCX373MEL Latches applications.
- Pattern generators
- Ring counter
- Hammer
- PCs and Notebooks
- Double bus register system
- BCD counting
- Flip-flops
- Avionics
- Buffer register
- Shift right register
