MC74LCX374DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 74LCX |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LCX16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 9.5 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74LCX374DTR2G Overview
The flip flop is packaged in a case of 20-TSSOP (0.173, 4.40mm Width). The package Tape & Reel (TR)contains it. T flip flop uses Tri-State, Non-Invertedas the output. There is a trigger configured with Positive Edge. Surface Mountis occupied by this electronic component. A supply voltage of 2V~3.6V is required for operation. It is at -40°C~85°C TAdegrees Celsius that the system is operating. Logic flip flops of this type are classified as D-Type. In FPGA terms, D flip flop is a type of 74LCXseries FPGA. This D flip flop should not have a frequency greater than 150MHz. There are 1 elements in it. A total of 20terminations have been recorded. You can search similar parts based on 74LCX16374. It is powered from a supply voltage of 3.3V. JK flip flop input capacitance is 7pF farads. An electronic device belonging to the family LVC/LCX/Zcan be found here. The electronic part is mounted in the way of Surface Mount. It is designed with 20 pins. Its clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. It is designed with 8bits. As soon as Vsup reaches 3.6V, the maximum supply voltage is reached. For normal operation, the supply voltage (Vsup) should be above 2V. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. The D flip flop is embedded with 2ports. Optimal efficiency requires a supply voltage of 3.3V. Despite external influences, it consumes 10μAof quiescent current. Currently, there are 8 channels available.
MC74LCX374DTR2G Features
Tape & Reel (TR) package
74LCX series
20 pins
8 Bits
MC74LCX374DTR2G Applications
There are a lot of ON Semiconductor MC74LCX374DTR2G Flip Flops applications.
- Memory
- Balanced Propagation Delays
- ESD performance
- Buffered Clock
- High Performance Logic for test systems
- Bounce elimination switch
- Differential Individual
- Individual Asynchronous Resets
- Storage Registers
- Count Modes
