MC74LCX374MEL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74LCX |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LCX16374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74LCX374MEL Overview
It is embeded in 20-SOIC (0.209, 5.30mm Width) case. You can find it in the Tape & Reel (TR)package. T flip flop uses Tri-State, Non-Invertedas its output configuration. It is configured with a trigger that uses a value of Positive Edge. Surface Mountmounts this electrical part. A voltage of 2V~3.6Vis used as the supply voltage. It is operating at -40°C~85°C TA. A flip flop of this type is classified as a D-Type. The FPGA belongs to the 74LCX series. In order for it to function properly, its output frequency should not exceed 150MHz. The list contains 1 elements. It consumes 10μA of quiescent current without being affected by external factors. 20terminations have occurred. The 74LCX16374family includes it. The power source is powered by 3.3V. Its input capacitance is 7pF farads. Devices in the LVC/LCX/Zfamily are electronic devices. This electronic part is mounted in the way of Surface Mount. This board is designed with 20pins on it. Its clock edge trigger type is Positive Edge. It is included in FF/Latches. Flip flops designed with 8bits are used in this part. A normal operating voltage (Vsup) should remain above 2V. The superior flexibility of this circuit is achieved by using 8 circuits. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. This flip flop has a total of 2ports. There are 3 output lines on it.
MC74LCX374MEL Features
Tape & Reel (TR) package
74LCX series
20 pins
8 Bits
MC74LCX374MEL Applications
There are a lot of ON Semiconductor MC74LCX374MEL Flip Flops applications.
- Divide a clock signal by 2 or 4
- Guaranteed simultaneous switching noise level
- Counters
- Circuit Design
- Dynamic threshold performance
- Matched Rise and Fall
- 2 – Bit synchronous counter
- ESD performance
- Consumer
- Event Detectors
