MC74LCX574DTG

2V~3.6V 150MHz 8 Bit D-Type Flip Flop DUAL 74LCX574 20 Pins 10μA 74LCX Series 20-TSSOP (0.173, 4.40mm Width)

Manufacturer: ON Semiconductor
Nocochips NO: 598-MC74LCX574DTG
Package: 20-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 977
Description: 2V~3.6V 150MHz 8 Bit D-Type Flip Flop DUAL 74LCX574 20 Pins 10μA 74LCX Series 20-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Current - Output High, Low	24mA 24mA
Max I(ol)	0.024 A
Max Propagation Delay @ V, Max CL	8.5ns @ 3.3V, 50pF
Trigger Type	Positive Edge
Input Capacitance	7pF
Number of Output Lines	3
Clock Edge Trigger Type	Positive Edge
Height	1.05mm
Length	6.6mm
Width	4.5mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-TSSOP (0.173, 4.40mm Width)
Number of Pins	20
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2012
Series	74LCX
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
Type	D-Type
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	FF/Latches
Packing Method	RAIL
Technology	CMOS
Voltage - Supply	2V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	3.3V
Terminal Pitch	0.65mm
Current Rating	3.6μA
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	74LCX574
Function	Standard
Output Type	Tri-State, Non-Inverted
Operating Supply Voltage	3.3V
Number of Elements	1
Polarity	Non-Inverting
Supply Voltage-Min (Vsup)	2V
Number of Channels	8
Load Capacitance	50pF
Number of Ports	2
Output Current	24mA
Number of Bits	8
Clock Frequency	150MHz
Propagation Delay	9.5 ns
Turn On Delay Time	1.5 ns
Family	LVC/LCX/Z
Logic Function	D-Type, Flip-Flop
Current - Quiescent (Iq)	10μA
Halogen Free	Halogen Free

MC74LCX574DTG Overview

In the form of 20-TSSOP (0.173, 4.40mm Width), it has been packaged. It is contained within the Tubepackage. In the configuration, Tri-State, Non-Invertedis used as the output. The trigger configured with it uses Positive Edge. Surface Mountis in the way of this electric part. Powered by a 2V~3.6Vvolt supply, it operates as follows. A temperature of -40°C~85°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. It belongs to the 74LCXseries of FPGAs. A frequency of 150MHzshould be the maximum output frequency. D latch consists of 1 elements. It consumes 10μA of quiescent current without being affected by external factors. 20terminations have occurred. This D latch belongs to the family of 74LCX574. A voltage of 3.3V is used as the power supply for this D latch. A JK flip flop with a 7pFfarad input capacitance is used here. The electronic device belongs to the LVC/LCX/Zfamily. There is an electronic part mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This device is part of the FF/Latchesbase part number family. It is designed with 8bits. Normally, the supply voltage (Vsup) should be kept above 2V. As a result of its reliable performance, this T flip flop is suitable for RAIL. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. A high level of efficiency can be achieved by maintaining the supply voltage at 3.3V. With a current output of 24mA , it offers maximum design flexibility. The JK flip flop is with 3 output lines to operate. Currently, there are 8 channels available.