MC74LCX574DWR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | 74LCX |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LCX574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74LCX574DWR2G Overview
The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). It is contained within the Tape & Reel (TR)package. Tri-State, Non-Invertedis the output configured for it. It is configured with a trigger that uses Positive Edge. Surface Mountmounts this electrical part. Powered by a 2V~3.6Vvolt supply, it operates as follows. It is operating at a temperature of -40°C~85°C TA. This electronic flip flop is of type D-Type. The 74LCXseries comprises this type of FPGA. You should not exceed 150MHzin its output frequency. D latch consists of 1 elements. As a result, it consumes 10μA quiescent current. A total of 20 terminations have been made. The 74LCX574 family contains this object. The power supply voltage is 3.3V. A 7pFfarad input capacitance is provided by this T flip flop. Electronic devices of this type belong to the LVC/LCX/Zfamily. It is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. This device has the clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latches. This flip flop is designed with 8 Bits. Normally, the supply voltage (Vsup) should be above 2V. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. A D flip flop with 2embedded ports is available. If high efficiency is to be achieved, the supply voltage should be maintained at 3.3V. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. Currently, there are 8 channels available.
MC74LCX574DWR2G Features
Tape & Reel (TR) package
74LCX series
20 pins
8 Bits
MC74LCX574DWR2G Applications
There are a lot of ON Semiconductor MC74LCX574DWR2G Flip Flops applications.
- Instrumentation
- Count Modes
- ATE
- Synchronous counter
- Dynamic threshold performance
- Set-reset capability
- Latch
- Buffered Clock
- Functionally equivalent to the MC10/100EL29
- Counters
