MC74LCX574MELG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | 74LCX |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LCX574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74LCX574MELG Overview
The flip flop is packaged in a case of 20-SOIC (0.209, 5.30mm Width). A package named Tape & Reel (TR)includes it. There is a Tri-State, Non-Invertedoutput configured with it. The trigger configured with it uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates at 2V~3.6Vvolts. Temperature is set to -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 74LCXseries FPGA. Its output frequency should not exceed 150MHz. A total of 1 elements are present. There is a consumption of 10μAof quiescent energy. There are 20 terminations,If you search by 74LCX574, you will find similar parts. The D flip flop is powered by a voltage of 3.3V . JK flip flop input capacitance is 7pF farads. It is a member of the LVC/LCX/Zfamily of D flip flop. This electronic part is mounted in the way of Surface Mount. This board has 20 pins. This device's clock edge trigger type is Positive Edge. This part is included in FF/Latches. There are 8bits in this flip flop. Normal operation requires a supply voltage (Vsup) above 2V. The superior flexibility of this product is achieved by using 8 circuits. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. This D flip flop is equipped with 0 ports. If high efficiency is desired, the supply voltage should be kept at 3.3V. It is designed with 3 output lines.
MC74LCX574MELG Features
Tape & Reel (TR) package
74LCX series
20 pins
8 Bits
MC74LCX574MELG Applications
There are a lot of ON Semiconductor MC74LCX574MELG Flip Flops applications.
- Synchronous counter
- Asynchronous counter
- Convert a momentary switch to a toggle switch
- Memory
- Consumer
- Bus hold
- Common Clocks
- ATE
- EMI reduction circuitry
- High Performance Logic for test systems
