MC74LCX74DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 12 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | 74LCX |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LCX74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 150MHz |
| Propagation Delay | 8.4 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 7ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 7 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74LCX74DR2G Overview
As a result, it is packaged as 14-SOIC (0.154, 3.90mm Width). D flip flop is included in the Tape & Reel (TR)package. In the configuration, Differentialis used as the output. This trigger uses the value Positive Edge. This electronic part is mounted in the way of Surface Mount. A 2V~3.6Vsupply voltage is required for it to operate. A temperature of -40°C~85°C TAis used in the operation. Logic flip flops of this type are classified as D-Type. The FPGA belongs to the 74LCX series. It should not exceed 150MHzin terms of its output frequency. Despite external influences, it consumes 10μAof quiescent current. Terminations are 14. The 74LCX74 family contains it. A voltage of 2.5V provides power to the D latch. A JK flip flop with a 7pFfarad input capacitance is used here. LVC/LCX/Zis the family of this D flip flop. This electronic part is mounted in the way of Surface Mount. As you can see from the design, it has pins with 14. The clock edge trigger type for this device is Positive Edge. The RS flip flops belongs to FF/Latches base part number. 3.6Vis the maximum supply voltage (Vsup). If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. In order for the device to operate, it requires 3.3V power supplies. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It is reported that there are 2 channels.
MC74LCX74DR2G Features
Tape & Reel (TR) package
74LCX series
14 pins
3.3V power supplies
MC74LCX74DR2G Applications
There are a lot of ON Semiconductor MC74LCX74DR2G Flip Flops applications.
- Bounce elimination switch
- Dynamic threshold performance
- Buffered Clock
- Power down protection
- QML qualified product
- Differential Individual
- Matched Rise and Fall
- Individual Asynchronous Resets
- Memory
- Automotive
