MC74LCX74DTG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | 74LCX |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LCX74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 150MHz |
| Propagation Delay | 8 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | AND, D-Type, Flip-Flop |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 7ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 7 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74LCX74DTG Overview
It is embeded in 14-TSSOP (0.173, 4.40mm Width) case. D flip flop is embedded in the Tube package. The output it is configured with uses Differential. The trigger it is configured with uses Positive Edge. Surface Mountis occupied by this electronic component. The JK flip flop operates with an input voltage of 2V~3.6V volts. It is at -40°C~85°C TAdegrees Celsius that the system is operating. It belongs to the type D-Typeof flip flops. The 74LCXseries comprises this type of FPGA. Its output frequency should not exceed 150MHz. There are 14 terminations,Members of the 74LCX74family make up this object. It is powered from a supply voltage of 2.5V. Input capacitance of this device is 7pF farads. Devices in the LVC/LCX/Zfamily are electronic devices. It is mounted in the way of Surface Mount. This board is designed with 14pins on it. This device's clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. In this case, the maximum supply voltage (Vsup) reaches 3.6V. The supply voltage (Vsup) should be maintained above 2V for normal operation. This D flip flop is well suited for RAIL based on its reliable performance. A power supply of 3.3Vis required to operate it. To operate, the chip has a total of 1 output lines. There is 10μA quiescent current consumption by it. There are 2 channels available.
MC74LCX74DTG Features
Tube package
74LCX series
14 pins
3.3V power supplies
MC74LCX74DTG Applications
There are a lot of ON Semiconductor MC74LCX74DTG Flip Flops applications.
- Automotive
- Balanced Propagation Delays
- Parallel data storage
- Balanced 24 mA output drivers
- High Performance Logic for test systems
- Dynamic threshold performance
- Frequency division
- Digital electronics systems
- Functionally equivalent to the MC10/100EL29
- Counters
