MC74LCX74DTR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | 74LCX |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LCX74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 150MHz |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 7ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 7 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74LCX74DTR2 Overview
The flip flop is packaged in 14-TSSOP (0.173, 4.40mm Width). A package named Tape & Reel (TR)includes it. As configured, the output uses Differential. In the configuration of the trigger, Positive Edgeis used. There is an electric part mounted in the way of Surface Mount. With a supply voltage of 2V~3.6V volts, it operates. It is operating at a temperature of -40°C~85°C TA. This D latch has the type D-Type. JK flip flop is a part of the 74LCXseries of FPGAs. Its output frequency should not exceed 150MHz. As a result, it consumes 10μA quiescent current and is not affected by external forces. A total of 14terminations have been recorded. This D latch belongs to the family of 74LCX74. The power source is powered by 2.5V. JK flip flop input capacitance is 7pF farads. A device of this type belongs to the family of LVC/LCX/Z. It is mounted in the way of Surface Mount. 14pins are included in its design. There is a clock edge trigger type of Positive Edgeon this device. It is included in FF/Latches. In this case, the maximum supply voltage (Vsup) reaches 3.6V. The supply voltage (Vsup) should be maintained above 2V for normal operation. In order to achieve its superior flexibility, 2 circuits are used. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. It runs on 3.3Vvolts of power. It has 1 output lines to operate.
MC74LCX74DTR2 Features
Tape & Reel (TR) package
74LCX series
14 pins
3.3V power supplies
MC74LCX74DTR2 Applications
There are a lot of ON Semiconductor MC74LCX74DTR2 Flip Flops applications.
- Circuit Design
- High Performance Logic for test systems
- Synchronous counter
- Control circuits
- Balanced 24 mA output drivers
- Memory
- ESCC
- Latch
- Bus hold
- Differential Individual
