MC74LVX139MG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| Series | 74LVX |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LVX139 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Throw Configuration | DP4T |
| Propagation Delay | 18 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 18 ns |
| Family | LV/LV-A/LVX/H |
| Current - Output High, Low | 4mA 4mA |
| Supply Type | Single |
| Prop. Delay@Nom-Sup | 15 ns |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74LVX139MG Overview
As a means of saving space, digital switch is provided in the 16-SOIC (0.209, 5.30mm Width).As a result, it is packaged in a way that is referred to as Tube.Mounting is performed using Surface Mount.the multiplexers uses an analog IC Decoder/Demultiplexer.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.The turn signal switch is designed for use with a 2V~3.6V supply voltage, which gives it a lot of flexibility.Multiplexers of the 74LVX series can be used in a wide range of applications.There are 16 terminations included in its basic configuration.As its base part number is 74LVX139, logic switch can also be used to find its related parts.The turn signal switch is supplied with a voltage of 2.7V volts.In this turn signal switch, there are 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a type of supply Single that is employed in this case.This multiplexer ic has 16 pins configured.This unit is mounted in the way of Surface Mount.The logic switch is included into the family of LV/LV-A/LVX/H.Keeping Vsup at 2V will prevent some unwanted failures.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V in order to prevent some unnecessary failures.The power supply of 3.3V is provided for mux switch's normal operation.There are 4 outputs designed for the operation of the turn signal switch.This is an the digital switch ic that is classified as Decoder/Drivers.No external influence consumes 2μA current of multiplexer ic.In accordance with RAIL, switches can be packaged.In order to accept voltage levels, the multiplexers have input lines 2 on the board.
MC74LVX139MG Features
Supplied in the 16-SOIC (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
2 input lines
MC74LVX139MG Applications
There are a lot of ON Semiconductor MC74LVX139MG Signal Switches / Multiplexers / Decoders applications.
- Make full adder
- Robotic vehicles
- Automatic health monitoring systems
- Code converters
- Steel plants
- Medical industry
- Electronics industry
- Logic circuits
- Memory system of computers
- Frequency multiplexing system
