MC74LVX157DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74LVX |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LVX157 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Power Dissipation | 180mW |
| Throw Configuration | DPST |
| Propagation Delay | 11.4 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Multiplexer, Mux |
| Number of Inputs | 8 |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 4mA 4mA |
| Supply Type | Single |
| Output Polarity | TRUE |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74LVX157DTR2G Overview
It is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save board space.Tape & Reel (TR) is the packaging method.For mounting, digital switch ic uses the method Surface Mount.the multiplexers uses an analog IC Multiplexer.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility when digital controlled switch operates at a 2V~3.6V supply voltage.The multiplexers can be used for a wide range of applications since they are members of 74LVX series.As part of its basic configuration, 16 terminations are designed as a part of it.The base part number is 74LVX157, which can also be used to find its logic switch related parts.For multiplexer's system, a voltage of 2.7V is supplied.This turn signal switch consists of 16 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.Single is employed as its supply type.There are 16 pins on it.The mount is in Surface Mount.There is a family of LV/LV-A/LVX/H members.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2V.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.It is provided that 3.3V has a power supply in order to function normally.This turn signal switch has 4 outputs designed for its operation.It has 8 inputs.The switches package is packaged in accordance with TAPE AND REEL.It is possible to accept voltage levels through 2 input lines of multiplexers.
MC74LVX157DTR2G Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
2 input lines
MC74LVX157DTR2G Applications
There are a lot of ON Semiconductor MC74LVX157DTR2G Signal Switches / Multiplexers / Decoders applications.
- Speed synchronization of multiple motors in industries
- Data communication
- A/D converters
- Relay
- Code conversion
- Make half adder
- Data transfer
- Idle motor
- Medium scale TV wall
- Microprocessor memory systems
