MC74LVX257DTG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 74LVX |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LVX257 |
| Pin Count | 16 |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Power Dissipation | 180mW |
| Throw Configuration | DPST |
| Propagation Delay | 12 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Multiplexer, Mux |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 4mA 4mA |
| Supply Type | Single |
| Output Polarity | TRUE |
| Number of Input Lines | 8 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 4 |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74LVX257DTG Overview
In order to save board space, digital switch is located in the 16-TSSOP (0.173, 4.40mm Width).The package is in the form of Tube.The method digital switch ic adopts for mounting is Surface Mount.The analog IC in the multiplexers is identified as Multiplexer.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility when digital controlled switch operates at a 2V~5.5V supply voltage.Since they are members of the 74LVX series, they can be used in a wide variety of applications.Its basic configuration includes terminations in the 16 range.To find signal switch's related components, a base part number of 74LVX257 may also be used.The multiplexer's system is powered by 2.7V volts.This turn signal switch has a total of 16 component pins.A conductor terminates at GULL WING.The supply type of this multiplexer ic is Single.It is configured with 16 pins.As you can see, it is mounted in the direction of Surface Mount.Among the family of LV/LV-A/LVX/H the logic switch is a member.Keep Vsup at 2V to avoid unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.6V.In order for 3.3V to operate normally, a power supply is provided.Currently, the switches is packaged in accordance with the RAIL method.The multiplexers have 8 input lines used to accept voltage levels.In this case, the signal source has a total of 4 output lines.
MC74LVX257DTG Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
8 input lines
4 output lines
MC74LVX257DTG Applications
There are a lot of ON Semiconductor MC74LVX257DTG Signal Switches / Multiplexers / Decoders applications.
- Enabling block of memory depending on address in memory chips
- Automatic Monitoring systems
- Automatic health monitoring systems
- Paper plants
- Data transfer
- Small scale TV wall
- Robotic vehicles
- Seven segment displays
- To select different task for memory in microprocessor memory systems
- Enabling different functions units in microprocessor instruction decoding
