MC74LVX259DT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| Series | 74LVX |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LVX259 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Standard |
| Number of Elements | 1 |
| Circuit | 1:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 12 ns |
| Quiescent Current | 1μA |
| Turn On Delay Time | 8 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 4mA 4mA |
| Logic Type | D-Type, Addressable |
| Max I(ol) | 0.004 A |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74LVX259DT Overview
In the 16-TSSOP (0.173, 4.40mm Width) package, it can be found as an embedded module. The package is in the form of Tube. Standard is the output configured for it. The Logic type of this electrical device is D-Type, Addressable. Based on the way of Surface Mount, this electronic part is mounted. There is no supply voltage for this device. There is -40°C~85°C operating temperature. An FPGA in this series belongs to the 74LVX family. The design of this electronic part is based on 8 bits. This device has been designed with 16 terminations available. As a member of the 74LVX259 family, it falls under that category. In order to operate it, the supply voltage must be 2.7V. It is equipped with 16 pin count. It is part of the family of electronic devices called LV/LV-A/LVX/H. With the design of the board, there are only 16 pins. A Surface Mount mounting method has been used for this electronic part. FF/Latches is the subcategory of this part. There is a maximum voltage supply (Vsup) that reaches 3.6V. A total of 3.3V power supplies are required for it to operate. The supply voltage (Vsup) should be greater than 2V. Based on its reliable performance, this device is appropriate for RAIL. The current consumed by the device is 1μA volts in quiescent mode, which cannot be affected by external factors. This object is composed of 1 elements.
MC74LVX259DT Features
16-TSSOP (0.173, 4.40mm Width) package
74LVX series
8 Bits
74LVX259 family
16 pin count
16 pins
3.3V power supplies
1 elements
MC74LVX259DT Applications
There are a lot of ON Semiconductor MC74LVX259DT Latches applications.
- Display
- Programmable binary
- Relay replacement
- Phase comparator
- Parallel Input
- Timers
- Decade counting
- Instrumentation
- Shift right register
- PCs and Notebooks
